Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    May 2022
    Location
    idaho
    Posts
    136

    Default anyone else have a fuel tank cover that sits high?

    2022 mojo, noticed a few sloppy/fit issues with the build... so far, just taking care of them on my own instead of wasting time taking it to the dealer and roll the dice on how well they fix it if at all.

    The center floor/fuel tank cover sits proud. most noticably where the trash/storage door is... like enough to trip on and definitely show wear over time.

    I ignored it all winter, but now i am prepping to be on the water this weekend, it is bugging me.

    So i pulled the cover. My eyes didnt lie. the whole think is about 1/8" proud, and the front edge by the storage door is about 1/4" proud. I am guessing they used a belt sander to trim the edges as they arent that straight.

    Either way, i plan on essentially planing it either with a sander or router. I was just gonna do the front edge, but i may as well do it all.


    Anyone else notice or have this issue?
    2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation

    previous: 2007 centurion elite V air warrior

  2. #2
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Must have been the new guy working on a Friday!!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  3. #3
    Join Date
    May 2022
    Location
    idaho
    Posts
    136

    Default

    Quote Originally Posted by HFarr View Post
    Must have been the new guy working on a Friday!!

    Sent from my SM-G781V using Tapatalk
    most likely haha.... seriously tho, ive been to shops and know that there is always a chance for human error, especially if its the new guy. obviously it wasnt that noticeable or i would have caught it at the dealer. things get noticed more when you sit and dream in the boat all winter in a heated shop
    2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation

    previous: 2007 centurion elite V air warrior

  4. #4
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,251

    Default

    After learning to surf last year and teaching both my daughters (9 and 7) how to kneeboard, this has been a long winter.
    Finally breaking 80's in Ohio this week. Maybe the water will be warm enough by memorial day. ��
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  5. #5
    Join Date
    Jan 2021
    Location
    South Florida
    Posts
    274

    Default

    Mine was the same exact way. It was on my list when i took it in for break in service. Dealer got the ledge smaller but it's still there for sure.

  6. #6
    Join Date
    May 2022
    Location
    idaho
    Posts
    136

    Default

    Quote Originally Posted by Bigs28 View Post
    Mine was the same exact way. It was on my list when i took it in for break in service. Dealer got the ledge smaller but it's still there for sure.
    glad im not the only one haha.... fixed it last night... 3d printed a 2" standoff for my router, and set the height, using it like a planer with the floor laying on a table top, worked great and now it is sitting flush like it should!

    now my only beef is with the v-drive cover... but its more out of sight so ill just leave it. It could use a slight trim, but it is also short, so it doesnt sit on the gasket like it should, so i may just add more gasket if i notice noise.
    2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation

    previous: 2007 centurion elite V air warrior

  7. #7
    Join Date
    Aug 2020
    Location
    Middle Tennessee
    Posts
    736

    Default

    Don't you just love paying this much and then still having to fix stuff haha?

    I'e had several little things like that on my SA as well.
    2020 Supra SA

  8. #8
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Quote Originally Posted by vdubnick View Post
    glad im not the only one haha.... fixed it last night... 3d printed a 2" standoff for my router, and set the height, using it like a planer with the floor laying on a table top, worked great and now it is sitting flush like it should!

    now my only beef is with the v-drive cover... but its more out of sight so ill just leave it. It could use a slight trim, but it is also short, so it doesnt sit on the gasket like it should, so i may just add more gasket if i notice noise.
    My vdrive cover, aka the doghouse, didn't fit flush against the back engine compartment wall at all. I put some weather stip on the inside edge to fill the gap. Can't see it, and it did help with noise.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  9. #9
    Join Date
    May 2022
    Location
    idaho
    Posts
    136

    Default

    Quote Originally Posted by SONIC View Post
    Don't you just love paying this much and then still having to fix stuff haha?

    I'e had several little things like that on my SA as well.
    hahaha, i know right


    Quote Originally Posted by HFarr View Post
    My vdrive cover, aka the doghouse, didn't fit flush against the back engine compartment wall at all. I put some weather stip on the inside edge to fill the gap. Can't see it, and it did help with noise.

    Sent from my SM-G781V using Tapatalk
    good to know, exactly what i was thinking of doing.
    2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation

    previous: 2007 centurion elite V air warrior

  10. #10
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    I have some pics of what I did posted somewhere in a past thread.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •