Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 44
  1. #21
    Join Date
    May 2018
    Posts
    4,920

    Default

    Quote Originally Posted by dakota4ce View Post
    My big MityVac holds the whole pan worth.


    Sent from my iPhone using Tapatalk
    What model?


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  2. #22
    Join Date
    Aug 2017
    Posts
    1,382

    Default

    Quote Originally Posted by larry_arizona View Post
    What model?


    Sent from my iPhone using Tapatalk
    7201 I think—2.3 gallon capacity.


    Sent from my iPhone using Tapatalk

  3. #23
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,693

    Default

    Quote Originally Posted by Tylerrnemt View Post
    Betcha it got stuck in the tube!
    You got it. It was stuck in the dip stick tube for 2 days with me trying EVERYTHING to get it out. I read everything i could find on the internet and everyone said the same thing....Don't ever do it. Finally i was able to get it to come out, still not sure how but it was out and i learned my lesson..
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  4. #24
    Join Date
    Apr 2016
    Posts
    223

    Default

    Do the newer boats come w/a drain hose installed? My '02 Supra had one, but I'm not sure if my '16 Craz does.
    2016 Craz

  5. #25
    Join Date
    May 2018
    Posts
    4,920

    Default

    The new raptors have a hose on the starboard side of engine.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  6. #26
    Join Date
    Feb 2015
    Location
    Gardendale, AL
    Posts
    445

    Default

    Quote Originally Posted by Tylerrnemt View Post
    I use the drain hose.... when I first bought mine I read a lot of people were getting their suction hose stuck inside the dipstick tube... also I never felt like sucking oil out through the dipstick would get as much of the old oil out as using the proper drain hose.

    Here is my set up.... a 1/4” quick release male air hose adapter screws perfectly onto that drain hose and my oil extractor hose fits perfectly over that adapter... pretty slick set up.
    Thanks so much for this suggestion. My winterization oil change took a fraction of what it normally did by using a1/4” quick release male air hose adapter. This is the tip of the year.
    Gil Hebert

    2014 Mojo

  7. #27
    Join Date
    Feb 2019
    Location
    Tulsa
    Posts
    152

    Default

    Ditto. Came here for the sole purpose of finding out what threads were on the drain hose fitting. Now to order a pump...
    ‘22 Makai
    '06 Gravity XLV -sold
    https://www.youtube.com/GreaseMonkeyTV

  8. #28
    Join Date
    Dec 2018
    Location
    Dublin, Ohio
    Posts
    361

    Default

    Is a pump necessary if I have the water strainer/flush kit? I'm not in a hurry, figured I could run the boat in my driveway and get it up to operating temp, then let oil drain. Knowing it'll take an hour or so.

    Any other reason for a pump?
    --
    2019 Craz

  9. #29
    Join Date
    Feb 2019
    Location
    Tulsa
    Posts
    152

    Default

    If the drain hose will fit through the bail plug hole, no.
    On my last boat, I'd pull the hose out, zip tie it to the trailer with a drain pan underneath, and just let it drain. It took 5-10 min cold.
    ‘22 Makai
    '06 Gravity XLV -sold
    https://www.youtube.com/GreaseMonkeyTV

  10. #30
    Join Date
    Aug 2016
    Location
    Freeland, Mi
    Posts
    49

    Default

    I see some people are routing the drain hose right through the bottom boat plug hole. Has anyone had to put an extension on their oil drain hose to get this to work?


    Sent from my iPhone using Tapatalk
    2004 Mobius LS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •