Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    598

    Default

    The upper part attached to the transom is the upper hinge. I had 1 leaking and rebuilt both of mine after Bennett sent me the kits. Kit comes with the plastic clip which makes it much easier and safer. There's a pretty stout spring inside the actuator and a lot of ATF.

    https://bennetttrimtabs.com/installM...rMar19-WEB.pdf
    https://bennetttrimtabs.com/installM...akdown-WEB.pdf
    https://bennetttrimtabs.com/installM...O-Ring-WEB.pdf
    2005 Mobius LSV
    325 EFI

  2. #12
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Exactly. It has to either pivot or slide or it just won't work. The angle of the actuator has to be able to change as it moves. That's why the comment of it being fixed at the transom attach point confuses me. Maybe his bracket is just really tight on that end and he thinks it doesn't move. Take a picture of the top side on the actuator where it mounts to the boat. Bet there is a pin in it.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  3. #13
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    598

    Default

    No pin. It flexes.
    2005 Mobius LSV
    325 EFI

  4. #14
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Wow. That's really not a very good design.


    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  5. #15
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    I opened the pdf and see what you mean now. Still don't like that design. Constantly flexing plastic will eventually fail. Not to mention it probably allows the wake plate to hange angle slightly under loads.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  6. #16
    Join Date
    May 2022
    Location
    Long Beach CA
    Posts
    9

    Default Hfarr

    Hay H yep it definitely fixed on the mounted end and pivots on the plate end. So it probably does flex at the fixed end. I’m going to just throw them on and see what happens, what else can I do u know.

  7. #17
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Quote Originally Posted by Moombius06 View Post
    Hay H yep it definitely fixed on the mounted end and pivots on the plate end. So it probably does flex at the fixed end. I’m going to just throw them on and see what happens, what else can I do u know.
    I bet they work fine. I bet the earlier comment where you said the tech told you the old ones had probably deformed over time is correct. The new ones will probably eventually do that too.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  8. #18
    Join Date
    May 2022
    Location
    Long Beach CA
    Posts
    9

    Default

    Okay I successfully put on the new actuators and it does flex at the mounting point of the back the boat as the plate goes up and down. The issue I have now is that the new actuator on the left still doesnÂ’t move.

  9. #19
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Quote Originally Posted by Moombius06 View Post
    Okay I successfully put on the new actuators and it does flex at the mounting point of the back the boat as the plate goes up and down. The issue I have now is that the new actuator on the left still doesnÂ’t move.
    Yes on the flexing. That was my whole point earlier. Something has to move/pivot at that end too for it to work. I'm not crazy about flexing plastic, but hey that is the design. Have you checked for power being sent to that side?

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  10. #20
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,251

    Default

    I suspect a bad relay.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •