Results 1 to 10 of 15
Thread: Fc5-u mounting question
-
04-07-2020, 11:20 PM #1Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
Fc5-u mounting question
Can I mount an x mount setup directly to this for rev 10? Any non custom ways to mount to the 3 hole flat plate?
'18 mojo
-
04-07-2020, 11:27 PM #2
Direct bolt up yes. Just did this with my icon 8’s this winter
Sent from my iPhone using Tapatalk
-
04-08-2020, 07:51 AM #3
https://www.wetsounds.com/product/ADP-Nautique-FC5-U
Designed for all Wet Sounds Rev series pods using the X-Mount hardware or the TC3-S BASE Mount. Check with your local Wet Sounds for details.
-
04-08-2020, 09:02 AM #4Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
How clean looking is the fc5-u with the x mount? The 3 holes on the fc5-u look very close together. Are they wide enough to catch both mount holes on the pod?
As far as making just the x-mount work could I swivel the top powder coated plate around 90 degrees mount the pod using one of the 3 holes in the tower plate and drill a hole in the powder coated plate to line up with one of the other 2 holes on the tower flat plate? The pod would be essentially mounted using one bolt and the other bolt would stabilize the plate from rotating'18 mojo
-
04-08-2020, 09:31 AM #5
It’s the best looking mount IMO
Sent from my iPhone using Tapatalk
-
04-08-2020, 10:01 AM #6Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
How many bolts are you able to get thru to attach the pod to the fc5-u? Looks like it would just be one since the holes are going the same way as the flat plate on the tower
'18 mojo
-
04-08-2020, 10:10 AM #7
The tower speaker pod attaches to the adapter using the same 2 bolt points that the TC3-SWIVEL and TC3-FIXED clamps do. The FC5-U adapter kit is supplied with 6 stainless allen head bolts.
-
04-08-2020, 10:16 AM #8Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
-
04-08-2020, 11:08 AM #9
-
04-08-2020, 01:01 PM #10
You can get all 3 bolts in from the flat plate to the mount.
Sent from my iPhone using Tapatalk