Results 1 to 3 of 3
Thread: Emergency cutoff switch issue
-
06-18-2013, 02:36 PM #1Senior Member
- Join Date
- Mar 2012
- Location
- Uniontown, oh
- Posts
- 263
Emergency cutoff switch issue
I've had a few times where my boat won't start. Then I play with the cut off switch under throttle next to he seat and it starts then the last time I had to fiddle with the terminals on the back. Do these switched go bad or am I just dealing with a connection that may have vibrated loose over time.? Thanks
Nick
2012 moomba mojo 2.5
2005 Moomba outback-sold
-
06-18-2013, 02:54 PM #2Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-18-2013, 02:57 PM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
It's possible that it is going bad. I had the actual keyed ignition switch fail in my boat. Sometimes it would start, sometimes not. It seemed worse when the engine was cold and I thought it was a fuel issue for a while. I "found" it by just turning the switch from OFF to ON and sometimes I would hear the fuel pump, sometimes not. If I "jiggled" the key, it would activate the fuel pump.
Hope this has been some help.1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier