Results 61 to 70 of 78
Thread: 08 gravity 3 upgrade
-
03-13-2010, 04:04 PM #61
Mike, I may have an extra one .
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
03-13-2010, 04:26 PM #62
Yea realy? Shoot me a Pm =) i want one just havn't realy focused on it with all the other work im doing.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-14-2010, 02:05 AM #63
HEY! Don't hijack my mod thread!. Oh, it's not my thread is it? Oh well. Enjoy!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-16-2010, 02:54 PM #64
I think I found the part that would replace the manifold and allow a second water inlet (Newty got this at his local HD). Orbit changed the size of all their unions and connections and stuff and my Lowes is carrying the new stuff. According to one seller on ebay the old stuff was actually made by Dura and isn't available anymore from Orbit -- or at least they aren't "making" it anymore. Here's a link to a seller that has it:
http://www.sprinklerwarehouse.com/30.../301-010-3.htmMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-16-2010, 02:55 PM #65
Daze suggested upgrading to the newer 1" valves and 1" lines all the way to speed up fill times. That's a great idea but will have to wait a little while. With that setup and 2 Rule pumps running the fill times should be acceptable if not quite blazing.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-16-2010, 03:11 PM #66
Pat, thats what the lady at orbit said as well. they do have inventory of older parts but they are not making them anymore.
good to know that dura is the same make .A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
03-16-2010, 09:51 PM #67
Are you saying your going to hook a Rule pump to both sides of that manifold? Double the water flow threw it?
I would consider going 1inch but i just bought all the new elbows and fitting for my new bags as 3/4th. Might need to talk with WM to see if i can exchange it hummm...Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-17-2010, 02:14 AM #68
Here's what I've been working on. Not done yet but added a tee to be able to use a second Rule pump-- this is Newty's plan, not mine, but I think it will work great. I also wanted a manifold that would let me leave the water strainer alone. So I put the second inlet right next to the water strainer when I built my manifold. Here's some pix:
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-17-2010, 08:27 AM #69
In your second pic the 2 90 elbows are the pump inlets right?
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-17-2010, 09:26 AM #70
does the strainer get both inlets?
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold