XLV custom Surf platform.

[Jeepers]

32 3/4" from center to center ( +/- an 1/8th)

image.jpg

The local shop I work with said he'd do it for 30% over cost + Shipping.

[Jeepers]

Look how clean that is!

image.jpg

[Jeepers]

Group Buy! OK. Here's the deal. Thanks to all of your interest I was able to negotiate 15% over dealer cost plus freight for forum members. 100% down payment since he'll have SC ship direct. He needs a minimum of 5 to order. For each order, he needs year, make, model and hull# for each vessel + name, address.....

ALPINE HAUS MARINA
Owner: Vince Zimmer
509-927-2505
[email protected]

Tell him your from the Moomba Forum and Travis Thams.

[Jeepers]

SurfWave Platform Group buy!! Alpine Haus Marina is willing to do 15% over cost + freight on the Surfwave platforms. Obviously he needs 100% up front as he will have SC ship direct to you. That's a pretty damn good deal!! Here's what he needs:

Year, make, model, name address.,,,,

Alpine Haus Marina
Owner: Vince Zimmer
509-927-2505
[email protected]
www.alpinehausmarina.com
12710 E. Indiana Ave
Spokane Valley, WA 99216

Vince is an honest and great guy! He's been in business for a very long time. AND! I know where he lives! Just down the lake from me.

[moombahighrider]

Any idea what sort of price range we are talking about here?

[reeder]

I'd be in for this.

[Jeepers]

$456.08 for the platform and $185.84 for the pad + shipping.

[jmvotto]

According to Vince, he will only sell to people in the Spokane washington territory area, respecting the dealer territory network.

[5:00]

I got my HDPE for my platform. I went all crazy and got the 1" and Hydro Turf to cover it up.
I don't like the idea of using carriage bolts because they can spin. Of course just using a jamb nut to loosen them when the time comes solves that problem.
I was thinking of using a blind nut like a T nut or a rivet nut. Not sure if that is a good way to go either. They are really clean looking but if they spin I am pretty screwed.
Let me know which is best.

[parrothd]

Carriage bolts for? Just use the screws from the platform..