[QUOTE=cpropes2005;324433]Anybody made any progress on this? I am toying with the idea of giving it a shot on my 2015 Mojo. For the electrical side I was thinking I would see if I could just splice into the power at each existing pump and use that to trip a relay that would draw power directly from the battery switch/fuse. Maybe three of the relays below? Seems like that shouldnÂ’t put any extra load through the stock controller but it would put it on the same circuit so that the existing switches and timers still work.

OLS 12V DC 120 Amp Split Charge Relay Switch - 4 Terminal Relays for Truck

Boat Marine I have a 17 Supra Se 550 and no you cant split the wires but I was going to use each pump wire to switch a relay and add another fuse box in the back until I noticed the PDM runs the pumps. The relay way will still work but now im wondering if i can just change the PDM? I will post a wiring diagram and parts needed to wire it using relays. Ill try and draw it out today if someone can post a picture of the pdm of a 6 pump system so we can see which was is easier