February Picture Thread

[DFTR Josh]

Got the Mojo out today for a test run for the season. New auto Wake update seems pretty nice. It was 57 degF and cloudy with heavy fog when we launched at 12:30. We were only in the water for an hour and as we were driving away from the boat ramp to go home the sun came up and temp climbed to 81. Go figure lol.
The 100 lbs a minute doesn’t seem to apply to me with our ballast pumps. We had to set the 900s for like 11 minutes to fill and front at 14:30 for the hard tank+IBS.

Yep... Just a good looking boat! I've had the same with filling the bags and extending the time.

[dakota4ce]

The Clearwater Foils DIY wake foiler project is UNDERWAY! I guess we will see what happens!

If you’re bored follow @unicornsurfcompany on Insta. It gets weird.


Sent from my iPhone using Tapatalk

[trayson]

It was 56 degF.


Sent from my iPhone using Tapatalk

That's us in April to May.

[rdlangston13]

That's us in April to May.

You know I got in up to my knees and it wasn’t as bad as I was thinking it would be. Would def suck to have to deal with it until May!


Sent from my iPhone using Tapatalk

[trayson]

The Clearwater Foils DIY wake foiler project is UNDERWAY! I guess we will see what happens!

If you’re bored follow @unicornsurfcompany on Insta. It gets weird.


Sent from my iPhone using Tapatalk

What kinda aspect are you going for. The liquid force I had was way too hard. The slingshot I have is so much more forgiving.

[dakota4ce]

What kinda aspect are you going for. The liquid force I had was way too hard. The slingshot I have is so much more forgiving.

https://www.clearwaterfoils.com/coll...s/surf-sup-kit

I am not inventing this, just assembling it. Check out the link.

[uyensun]

It's February. It's so hot in my country.

[SorryCharlie]

It was 80 degrees at Lake Lanier Saturday, the water temp was 63.

Washed and ready.
IMG_20180224_102936.jpg

On the lake
IMG_20180224_151055.jpg

[trayson]

https://www.clearwaterfoils.com/coll...s/surf-sup-kit

I am not inventing this, just assembling it. Check out the link.

Interesting. Looks more similar to the low aspect foil that was on my Liquid force foil fish. That one supposedly took less speed to get lift from. But in practice, I found that it was all or nothing. It would launch up, crest the surface, and then slam me down. Whereas with the Slingshot foil, I was able to ride consistently on the 2nd pull. Hard to tell how it's going to perform by those pictures, but it'll certainly be a cool project!!! Keep us updated.

[dakota4ce]

Interesting. Looks more similar to the low aspect foil that was on my Liquid force foil fish. That one supposedly took less speed to get lift from. But in practice, I found that it was all or nothing. It would launch up, crest the surface, and then slam me down. Whereas with the Slingshot foil, I was able to ride consistently on the 2nd pull. Hard to tell how it's going to perform by those pictures, but it'll certainly be a cool project!!! Keep us updated.

For sure. Kind of why I bought the cheapo to start. I do want it to fly slowly but not be a bucking bronco. The kid that makes them flies it behind a tiny fishing boat!

Either way, glassing it has been kind of fun. It’s winter.


Sent from my iPhone using Tapatalk