Results 1 to 6 of 6
-
09-23-2009, 05:20 AM #1Junior Member
- Join Date
- Jul 2006
- Posts
- 6
Changing out prop on 2006 Outback V
Is there any special tool or anything I will need to change out my prop? Also the new prop is 14.25X14.50, the old one is 14X14.25, does this matter?
-
09-23-2009, 06:26 AM #2Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
you'll need a prop puller. use anti sieze when you install the new prop. don't usually see that size prop. why the change?
-
09-23-2009, 11:06 AM #3Junior Member
- Join Date
- Jul 2006
- Posts
- 6
That is the size OJ props sent me. Will it not work?
-
09-23-2009, 02:14 PM #4Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
should work fine. something wrong with your original or do you just want a spare?
-
09-23-2009, 03:51 PM #5Junior Member
- Join Date
- Jul 2006
- Posts
- 6
One of the blades fell off at 48 mph on Lake Mead. Did not hit anything! I will try tpost pictures of it. OJ sent me a brand new one with NO arguements.
-
09-23-2009, 03:57 PM #6Junior Member
- Join Date
- Jul 2006
- Posts
- 6
Here are the photos of my prop!!!