Wiring Harness (or plug) for Tower Speaker/Lights

[viking]

Where can you buy a wiring harness to wire up 4 speakers and a 5 light bar on the tower and have a plug through the gelcoat like there is from factory for the Navigation Light on the tower? I would imagine I'll need to come down the passenger side for the sound and lights and would like it to match the other side. And would like to confirm size of Rad-a-cage on 07 outback (if i had to guess i'd say 1-5/?

[Mobi1]

wirecare.com...
Factory wire plugs and pins. Just hooked my tower speakers up last weekend. Have pics if needed.

[viking]

Thanks Mobi1
I searched there and lookes like what I was trying to explain was a "deutsch assembly"? But I don't see the mount that screws into the boat to hold it in place. Pics would definitely be helpful. You can PM me if you'd rather. Thanks for all the help!

wirecare.com...
Factory wire plugs and pins. Just hooked my tower speakers up last weekend. Have pics if needed.

[mcdye]

I too would like to see setup. I just ran wires thru hull but would like to clean and add plug since i drop the tower to store boat.

[brain_rinse]

Something like this? http://www.earmarkcaraudio.com/Xcart...cat=311&page=1

[jmvotto]

http://www.onlyinboards.com/Ski-boat...krypt-dyi.html


http://www.bartswatersports.com/cata...ctor/index.asp


the skylon is pretty pricey

[viking]

Here's what mine looks like for the tower nav light!

wirecare.com...
Factory wire plugs and pins. Just hooked my tower speakers up last weekend. Have pics if needed.

[bergermaister]

I picked up one of the Krypt style ones off eBay for about $36 earlier this spring. The Krypt is not quite as low profile as the one shown above but works well. I guess it is the same style of plug they use for bands/instruments that play outdoors.

[viking]

BUMP!
Still searching........anybody else know where to track one down?

[BobP]

Here is where I got mine...doing tower speaker install, haven't drilled into boat yet:

http://www.deutschconnector.com/prod...es_connectors/