Results 1 to 2 of 2

Thread: Tower Gaskets

  1. #1
    Join Date
    Aug 2008
    Greenville, SC

    Default Tower Gaskets

    I been having a problem with my gaskets under the base of my tower spinning out from under the base. Had issues last year and got them all replaced at the beginning of the year this year. No after about 115 hrs the gasket on the back left has spun almost all the way out again. Anyone had this problem and know how to prevent it?

    Is it hard? safe? to remove the tower screws and replace the gaskets myself or should i have the dealer do it again?
    2006 Moomba Mobius LSV Black/Grey
    Board - 08 Ronix Covin / 08 Ronix Cells
    Surf - CWB Tsunami
    Audio - 6 - JL M650-CCX 6.5" in boat
    2 - JL M770-ETX 7.7" on Tower
    2 - JL 10" W1 Subs
    JL M6600W & JL M1700W Amps

  2. #2
    Join Date
    Aug 2006
    Salt Lake City


    ordered some from my dealer.. replaced them... not that much trouble..
    here is the culprit..screws / bolts on underside vibrate loose.. get a second nut and tighten it on top of the first nut!

    I ddint' and my new ones have slipped again!! UGH!

    2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
    2006 Moomba Mobius LSV sold
    2004 Outback sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts