Results 11 to 19 of 19
Thread: parts list
-
09-11-2009, 01:22 PM #11
Thanks for the research Ed.
VA LSV if you still have the parts list it would be greatly appreciated.A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
09-11-2009, 03:48 PM #12Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
From 2/07. Check out the price for the bags.
-
09-11-2009, 09:30 PM #13
can't read it
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
09-12-2009, 12:44 PM #14
-
09-13-2009, 07:28 AM #15
sharpie,
thanks, i can read it now. same issue on the bags(pricey)
but i was qouted for stock bags at 16 x 10 x 70 size bags (400's), that confused me because i have never heard that size here on the BB and that the back locker is about 44 in in lenghth at its max.
How long did it take you to do the project once you got the parts.A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
09-14-2009, 01:36 PM #16
16X10X70 is the ski locker bag, not the rear storage lockers.
-
09-14-2009, 01:52 PM #17Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
I think that is the stock rear bag size for the newer LSV's. They extend up under the rear seats. Get a couple of 750's.
Install was a breeze. Everything comes pre-wired. Took my time in the garage over winter. Don't want to rush cut out for the switch panel or holes for pump outs.
-
09-14-2009, 02:00 PM #18
yes SC even stated those are the factory bags (10 x16 x 72 )for the OBV 07, No possible way i have 10 inches of clearance under the seats for those bags
Va lsv , was the boat pre wired for the triple ballast or do i have to run wired, you spoke of pre-wired?.Last edited by jmvotto; 09-14-2009 at 02:15 PM.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
09-15-2009, 06:17 AM #19Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
Parts list includes the wiring harness. Mount the relay/fuse block under the dash & connect 12V + & - from the distribution block. Everything else is prewired Deutch connectors as far as electrical.