Results 1 to 3 of 3
Thread: bent strut
-
04-19-2004, 07:04 PM #1Junior Member
- Join Date
- Apr 2004
- Posts
- 4
bent strut
can I replace a strut my self? Can a bent strut be straightened and how much does a strut cost and how much would it cost to have it done if it is truley only the strut
-
04-26-2004, 06:17 PM #2Junior Member
- Join Date
- Apr 2004
- Posts
- 2
Replying to Topic 'bent strut'
YES YOUR BENT STRUT CAN BE BENT BACK DEPENDING ON THE SEVERITY AND DEGREE STRUT IS BENT TO. I JUST HAD MINE FIXED ALTHOUGH I HAD TO GET A NEW STRUT I WAS ABLE TO BEND BACK THE SHAFT WHICH ALSO MAY BE A PROBLEM SO CHECK THAT AS WELL
-
04-26-2004, 06:26 PM #3Junior Member
- Join Date
- Apr 2004
- Posts
- 2
Replying to Topic 'bent strut'
TO ANSWER THE QUESTION TO CHANGE THE STRUT YOURSELF IS A VERY DIFFICULT TASK BECAUSE YOU HAVE TO NOT ONLY CHANGE THAT BUT CHECK THE ALIGNMENT OF THE SHAFT WHICH UNLESS YOU ARE A PROFESSIONAL I THIS FIELD IT WILL BE VERY HARD
Similar Threads
-
Strut bearing
By rosh in forum General ChatReplies: 0Last Post: 05-03-2007, 08:25 PM -
Bent prop, strut and shaft
By Rugburn in forum Service & RepairReplies: 14Last Post: 07-29-2006, 11:41 AM -
Bent rudder..........How much $$$
By jeffreyala in forum Service & RepairReplies: 1Last Post: 07-05-2005, 07:24 PM -
strut alignment
By mmoody in forum Service & RepairReplies: 2Last Post: 04-21-2004, 11:43 PM -
Drive shaft Strut bearing
By Yellowmobius in forum General ChatReplies: 5Last Post: 09-08-2003, 07:16 AM