Results 11 to 13 of 13
-
09-20-2009, 11:46 PM #11Senior Member
- Join Date
- Oct 2007
- Location
- Panama City Florida
- Posts
- 1,798
Going Forward there is no pressure on the master cylinder, if they are dragging going forward you might have stuck pistons in the calibers. With the boat off the trailer you should be able to jack up one side of the trailer and easily turn that wheel. If you release the bleeder valve on that calilber and it still doesn't turn easily it might be time to rebuild those calibers as the pistons are not returning to a rest position.
-
09-21-2009, 12:57 AM #12Junior Member
- Join Date
- Aug 2009
- Posts
- 19
thats not the problem. If the piston was stuck, when you let all the fluid out they would still be stuck right. And i just replaced both entire torsion arm unit not that long ago. So new every thing.
Last edited by yotaismygame; 11-03-2009 at 12:38 AM.
-
11-03-2009, 12:38 AM #13Junior Member
- Join Date
- Aug 2009
- Posts
- 19
Ended up being the mastercylinder.