Results 1 to 10 of 21
Threaded View
-
07-24-2009, 01:46 PM #1Member
- Join Date
- Jul 2009
- Location
- Riverview, FL
- Posts
- 77
DIY Walk Through Wind Block - Idea
Again, just a brainstorm here, but so far this seems like a pretty sound idea to me.
Dave told me yesterday the bow screen Moomba has is a canvas snap it. I am not sold on that, so I got to thinking about a cool DIY wind block. I got the idea from the Malibu DVD I was watching a few weeks ago.
Get 4 strips of plexiglass about 1/2" wide by 1/2" thick, one sheet of 1/4" thick Smoke Grey transparent plexi and cut to the dimensions you need to fill the walk through.
On each side screw in two strips of plexi about 3/8" of an inch apart. Then simply slide the large plexi between the slots and you have an easy and stowable walk through wind block.
I even know a guy who could engrave these with the Moomba logo or the Roo. How freaking cool would that be?
Let me know your thoughts on this idea.