Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2006
    Location
    Olathe Colorado
    Posts
    217

    Default '07 LSV winter projects

    I am still trying to get some of the pix taken but figured I could updat ltr.

    Swim platform- 10 leds mounted under platform and lip filled in.
    Swim platform Gator grip on top transom protector/ around bow light/ and gunwales
    Red led inside lighting.
    Tower lightbar 3-forward 3 aft
    Roo stickers on front both sides, "Roo Whoo" Name on back
    Re wired trailer with soderd connections and new style plug
    Nets in cargo area over bags for ropes/ jackets
    Bow filler cusion
    New ACME prop ( high altitude)
    Tie downs on trailer
    Gravity 4 Ballest up and running, 750 each rear,400 ski locker,650 bow sac?







  2. #2
    Join Date
    Jul 2006
    Location
    Olathe Colorado
    Posts
    217

    Default '07 LSV Winter project #2








  3. #3
    Join Date
    Jul 2006
    Location
    Olathe Colorado
    Posts
    217

    Default

    couldnt resist.. Last run of the day finished like this!


  4. #4
    Join Date
    Jun 2009
    Posts
    6

    Default

    awesome!! that gives me some ideas. what lake is that?? i have yet to see (it seems) any smooth water at lake powell.. just very early in the morning otherwise the wind has blown all year!!

  5. #5
    Join Date
    Jul 2006
    Location
    Olathe Colorado
    Posts
    217

    Default

    Thats are local lake Sweitzers here in colorado... Where at in powell are you playing? We get down there for a week in Setember. The rest of our crew is there on and off all summer? Out of bullfrog

  6. #6
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Nice! How did you do the bow filler/jump seat?

  7. #7
    Join Date
    Jun 2009
    Posts
    6

    Default

    WOW sweitzers lake!! i havent been there in 20 years! we live in grand junction and have our boat in dry storage at bullfrog.we are usually at lake powell at least 2 times a month.maybe some time we could hookup so i can see your led's.

  8. #8
    Join Date
    Jul 2006
    Location
    Olathe Colorado
    Posts
    217

    Default

    ChevyMan,you bet let me know when your coming down this way.

    As for the Seat build, I welded a reverse truss (Bridge) that sits between the sides and on the floor. Its 3/4 alum angle. Its way over built but I was thinking about the big guys in my boat. When I do it again I will run the plastic Sea Deck strips down the side of the walkway Perminet, and just let the cushons set on top of it. I lost about 1.5 inches underneath the seat width because of the truss. I really dont think its needed! I can open the ski locker but a little more room is always nice!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •