Results 1 to 1 of 1
Thread: Seating a new Impeller??
-
07-09-2009, 11:48 AM #1Junior Member
- Join Date
- Jun 2009
- Posts
- 9
Seating a new Impeller??
I've posted a couple threads regarding overheating on my 98' Moomba...Recently I came across a thread on another website asking for advice on replacing an impeller. My question is this, does a new impeller have to be hammered (seated) on the shaft of the raw water pump? I've noticed the impeller sticks out of the housing a bit (nothing major) upon replacing prior impellers. Could this possibly be causing my impellers to fail prematurely causing my overheating problem. Any advice/info would be greatly appreciated!