Results 1 to 8 of 8
Thread: Floor removal 08 LSV
-
07-09-2009, 09:52 AM #1
Member
- Join Date
- Jan 2008
- Location
- Holt MI
- Posts
- 97
Floor removal 08 LSV
I was just out in my boat trying to figure out how to remove the floor panels. Am I an Idiot? I don't see any screws to start with.
2008 LSV
-
07-13-2009, 10:29 AM #2
Member
- Join Date
- Jan 2008
- Location
- Holt MI
- Posts
- 97
Has nobody ever taken out these two panels?
2008 LSV
-
07-13-2009, 10:47 AM #3
Senior Member
- Join Date
- Jun 2008
- Location
- Henderson, NV
- Posts
- 7,028
bump as I am awaiting a response to this as well. I don't see how they come out...
'06 Supra Launch 20SSV-gone but never forgotten
-
07-13-2009, 11:45 AM #4
Member
- Join Date
- May 2009
- Location
- AL
- Posts
- 65
I have an 06 LSV.
I've not taken the floor panels out but I can see a small bit of the screw heads just off the corners of the panels. They are in the carpet, just hard to see.
At least mine are......
-
07-13-2009, 01:31 PM #5
Member
- Join Date
- Jan 2008
- Location
- Holt MI
- Posts
- 97
LSM, do you have the 2 panels or is it like Jesse's 02?
2008 LSV
-
07-13-2009, 07:42 PM #6
Member
- Join Date
- May 2009
- Location
- AL
- Posts
- 65
I have the 2 panels.
-
07-13-2009, 09:11 PM #7
Member
- Join Date
- Feb 2008
- Location
- Redondo Beach Ca.
- Posts
- 52
There are screws in the corners of the panels,They are hidden by the carpet. Just brush your had over the carpet to move the fibers and you will see them.Make sure to use a good quality screwdriver,they are soft screws and about a mile long!
-
07-13-2009, 09:15 PM #8
Member
- Join Date
- Jan 2008
- Location
- Holt MI
- Posts
- 97
found them. I just tapped on the floor with a screw driver until i could hear it hit metal. I kept looking in the crack between the panels for some reason.
2008 LSV
Reply With Quote