Results 1 to 2 of 2
Thread: depth cable routing
-
07-09-2009, 08:41 AM #1
depth cable routing
I'm going to install a depth gauge in my new LSV but I'm not sure how to get the cable routed through the floor. Anyone done this?
Thanks
Dan2008 LSV
-
07-09-2009, 01:07 PM #2Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
When my depth cable was run they ran it on the starboard side of the boat next too the haul. It went above the speakers and to the dash.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill