Results 11 to 13 of 13
-
06-27-2009, 03:04 AM #11Member
- Join Date
- May 2009
- Posts
- 68
-
06-28-2009, 09:57 PM #12Sled491 Guest
the trick is to start drilling the hole with the drill running in reverse.
-
06-28-2009, 10:53 PM #13
If you don't drill that way the rivits or screws puts pressure on the gelcoat. By drilling the gelcoat wider, the rivits or screws are exerting pressure only on the fiberglass underneath. Whoever installed the snaps should have known that as that is a basic rule.
1998 Mobius
310 HP PCM
SOLD