Page 3 of 21 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 207

Thread: my 08 LSV mods

  1. #21
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    Brain i'm assuming that sub enclosure is a premade box of MDF? If so in that position you can get water, especially coming over the bow and if it hits that MDF it'll swell and crumble so fast you won't believe it! Being as you can't see it i would recommend you pull it, strip that carpet and coat it twice with resin or spray on truck bed liner.

    You can always put the carpet back on if you wish. I'm just saying ... seen it happen more than once!
    2007 Mobius LSV

  2. #22
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Quote Originally Posted by Razzman View Post
    Brain i'm assuming that sub enclosure is a premade box of MDF? If so in that position you can get water, especially coming over the bow and if it hits that MDF it'll swell and crumble so fast you won't believe it! Being as you can't see it i would recommend you pull it, strip that carpet and coat it twice with resin or spray on truck bed liner.

    You can always put the carpet back on if you wish. I'm just saying ... seen it happen more than once!
    Yep, good suggestions. I built the box and did use MDF, but I coated the box with 3 heavy coats of polyurethane before carpeting. I also put 1" plastic feet on the bottom of the box so there is a gap between the box and floor.

  3. #23
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    There ya go, that should hold the water demons back!
    2007 Mobius LSV

  4. #24
    Join Date
    Jun 2009
    Location
    Minneapolis, MN
    Posts
    386

    Default

    Have you powered up the Fusions yet? If so, how do you like them? Getting good reviews all over the place. What a steal at $115.

    Mine showed up yesterday.
    Sold my Moomba. Currently boat whoring.

    Set Ups - 09 CWB Transcend Platinum w/ 09 Ronix Cells (his) and 08 Liquid Force Angel w/ 08 Alloys (hers)

  5. #25
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Quote Originally Posted by Jeff W View Post
    Have you powered up the Fusions yet? If so, how do you like them? Getting good reviews all over the place. What a steal at $115.

    Mine showed up yesterday.
    No, I started drilling holes in the tower but still need to run the wires. Definitely a steal if they sound even halfway decent!

  6. #26
    Join Date
    Jul 2009
    Location
    virginia
    Posts
    33

    Default

    Quote Originally Posted by brain_rinse View Post
    Ok, not really a mod but thought I'd show my fake-a-lake. I started with a washing machine drain hose (1" ID with 1 1/4" ID on the end), stuck in a 1" pvc barb fitting and added a hose adapter.
    I'd also like to know where you are connecting that "fake-a-lake".
    I haven't seen pics on this thread...can you post one?

  7. #27
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Quote Originally Posted by svnfightsvn View Post
    I'd also like to know where you are connecting that "fake-a-lake".
    I haven't seen pics on this thread...can you post one?
    Sure - here's a pic from an older thread that shows where to connect. Loosen hose clamp, remove black hose, attach fake-a-lake, tighten down hose clamp.
    https://forum.moomba.com/showpost.ph...0&postcount=32

  8. #28
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default Locking rear storage

    Last edited by brain_rinse; 01-31-2013 at 09:49 PM.

  9. #29
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default ski locker drain plug

    I put this together to keep the backwash from the bilge from entering the ski locker. I couldn't find a plug to fit tight so I picked up an inch and a half marine plug and ground down to rubber to the right diameter. Replaced the nut with a wing nut and cut off the bottom edge to fit.

    Attached Images Attached Images
    Last edited by brain_rinse; 01-31-2013 at 09:54 PM.

  10. #30
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default Fusion speakers - powder coating and rewiring

    More info here:
    https://forum.moomba.com/showthread.php?t=9783

    Attached Images Attached Images
    Last edited by brain_rinse; 01-31-2013 at 09:56 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •