Vinyl problems

[SoTX]

1. on my 05 XLV the seam between the blue and white viyl have come apart on the back deck on all three cushions. This happened over the memorial weekend. I took them to an upholsterer and he sewed them back up. I also had him sew up all the othere seams that had no problems just to be safe. The problem is the upholster guy had to take up a little more matrerial to sew these back together. So the vinyl is pulled a little tighter and after using the boat again this past Sunday I have a feeleing these seams are going to bust again. Has anyone ever had to have seams repaired and if so did it last. Also has anyone ever had to just re-upholster anything and if so how does that work. Doea dealer do it or do you just order the vinyl and have it done or what?

2. What is the best vinyl cleaner for getting your vinyl looking new again?

3. Is there a good protectant that you would recommend for protecting the vinyl from stains?

[kaneboats]

Everybody should be using a UV protectant these days. You can run a search on upholstery or vinyl and read the full descripton on how I did mine myself but had an upholstery guy use the old covers for patterns.

[SoTX]

Well I store my boat indoors so I am not as worried about UV as I am protecting the vinyl from stains from any variety of things food, sun screen, wine, beer ect...

[ajsboat]

I have a 04 XLV with the same colors you have (if your pic is up to date). My rear sun deck (3 doors with a blue and gray strip going thru all 3) had some tears in it. I just had it replaced 2 months ago. The guy I used did a PERFECT job and charge me $600.

Maybe I could of had it done cheaper. I don't know. But, if you used the right materials its not cheap.

I never realized that it is actually high quality marine leather not vinyl and the white leather that covers most all the boat is actually a light gray. Hold a white shirt next and you can tell.

Also there are many different grains of leather to make sure you match that to.

Hope this helps.

[mmandley]

I use the Boat Buddies Vinyl cleaner and it has UV protectant in it.

I use this can of spray called Tuff Stuff you can get it al any auto store for cleaning stains. It can be used on carpets leather vinal or anything. And i thin it smells pretty decent.

I would use some sort of UV protectant even though its kept in the garage because just like us, we sunburn from UV rays and UV rays dry the fabric.

[Kelsey]

S.C. sent out a newsletter a few years back which detailed there recommended cleaning procedures for the vinyl It was pretty detailed and I don't remember every bit of it but here is what I remember.

Warm soap and water should always be the first line of defense.

Fantastik (the original type) should be your 2nd line....

it broke off from there into cleaning different types of stains etc. I'm sure you can find that newsletter somewhere. I called SC on this and asked if I should use some sort of protectant (marine armor all, etc), they discouraged it. I think they said it would shorten the life of the fabric.

[kaneboats]

it is actually high quality marine leather not vinyl

Are you messing with us?

[NCSUmoomba]

I too have had my stitches and seams split. I had my upholstery guy try to restitch them and it turned out okay. He claimed that the factory trimmed the excess vinyl after the panels were sewn, thus leaving not much to work with. I can't say if that is true, but I do know that my boat is getting really close to a complete interior overhaul, vinyl and carpet. That will be a fun project.

[Razzman]

Everybody has their own opinions on this. A couple years back Mastercraft put out a letter to MC owners stating if it was determined that any household cleaner, and it specifically stated Fantastik and Formula 409, was used in their boats then it would void any and all warrenties levied against the interior.

The reason? These cleaners are meant for hard non pourous surfaces, not softgoods and especially not something as delicate as stitching. Water alone over time can degrade fabrics all on it's own, add a caustic solvent and what do you think happens?

I use only Babes Seat Saver & Seat Soap to protect & clean my vinyl. Conditions the materials as well as offers UV protection. Once a month at least depending on how much it's in the sun i'll use 303 Areospace Protectant, there's nothing better at UV protection, period. If it's good enough for the areospace industry it's good enough for me! I've used nothing but a good vinyl cleaner topped by 303 for three years on my spa cover and it still looks like new! If in doubt then read this story here about the lifevest!

I buy Babes and 303 by the gallon and keep spray bottles of Babes Boat Brite, Seat Saver and 303 Protectant in the boat at all times when camping or on extended outings.

As a side note, Sunbrella states that if you have to scrub clean any product (especially boat covers, biminis) made with their product then you should immediately re-treat when dry with 303 High Tech Fabric Guard or you'll degrade the waterproofing and fade protection of the fabric.

Lot of typing, hope this helps. Take care of your vinyl & fabrics!

[08LSV]

I agree with Razzman. It is very good info. I only use "Babe's" Seat soap & Seat Saver. You need to be careful with automotive grade products or household degreasers as they can breakdown the thread used to stitch Marine Vinyl, causing the rips, tears and separation. The most common thread usually has organic base rather than a synthetic and degreasers breakdown or degrade organic material.