Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Carb Questions

  1. #1
    Join Date
    Aug 2008
    Location
    Athens, Al.
    Posts
    117

    Default Carb Questions

    Does anyone know what car comes on a 2000 Outback? I know it is a Holley brand but I do not know if it is a 600cfm or a 750cfm...


    Thanks

  2. #2
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    I'd bet it's a 600 or 650cfm carb. 750cfm is a lot of air moving through it and generally a small block cannot move that kind of unless the heads have been seriously ported.

    Just out of curiosity why the question?
    2007 Mobius LSV

  3. #3
    Join Date
    Aug 2008
    Location
    Athens, Al.
    Posts
    117

    Default

    When I go to hit the gas it has a miss... You have to feather the gas to make it go. Once it goes it is fine. It is just getting it going.

  4. #4
    Join Date
    Mar 2004
    Location
    Martinsville,Indiana
    Posts
    213

    Default

    Accelerator pump diaphram?

  5. #5
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    I'm guessing it's probably the idle circuit. If it was the fuel pump theoretically it would apply throughout the full range. Sounds like it's time for a rebuild or replace. See if you have a shop locally that does marine rebuilds. There are a bunch of reputable places on the web that offer exchanges for rebuilds with warrenties.

    Just stay as far as you can from this place, Carbcare USA/! Took me six months and at least a dozen calls to get a refund from him on a returned carb from an old boat i had!
    2007 Mobius LSV

  6. #6
    Join Date
    Jul 2008
    Location
    Flowery Branch Georgia
    Posts
    201

    Default

    I recommend you rebuild the carb you have if you buy a rebuilt unit you will get parts from multiple carbs. There are slight variations in different years
    and different carbs. Better to keep the original carb then you know what you have. Call Skidim they will help you with your carb identity. They have kits and new units for you boat. Good Luck

  7. #7
    Join Date
    Aug 2008
    Location
    Athens, Al.
    Posts
    117

    Default

    I have been trying to decide weather to find someone to rebuild mine or order new. I will not order a rebuilt one,,,it will be new if I go that route. I have found the kits to do it but I hve not had any luck finding some one local to build it...


    Who is Skidim?

  8. #8
    Join Date
    Aug 2008
    Location
    Athens, Al.
    Posts
    117

    Default

    Does anyone know weather it is a 600 or 750. Those are the only ones Holley offers for replacement

  9. #9
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    Like i said there's no way it's a 750 unless your sporting a big block or a juiced small block. Take the numbers off of it and call Holley, they'll tell you.
    2007 Mobius LSV

  10. #10
    Join Date
    May 2007
    Location
    Naperville, IL
    Posts
    315

    Default

    Quote Originally Posted by 2000OUTBACK View Post
    Who is Skidim?
    Skidim is Discound Inboard Marine. Great people who can help you out.

    http://www.skidim.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •