Results 1 to 4 of 4
-
05-22-2009, 02:53 PM #1Junior Member
- Join Date
- May 2009
- Posts
- 7
Wake plate guage not working 04 lsv
I was out at the lake yesterday and my wakeplate gauge started going the opposite way that the plate was. Then it just stopped working. I was looking at all the connections and they seem to be good. When I turn the ignition on the gauge will drop to the lowest point but when I adjust the plate it will not move at all. Any ideas?
-
05-22-2009, 06:38 PM #2
Sounds like a ground wire to the gauge is loose or gone bad. Most gauges will goto one side or the other completely with a bad ground.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-03-2009, 03:30 PM #3Junior Member
- Join Date
- May 2009
- Posts
- 7
Ya I played with the ground and then decided that making a new ground wouldnt hurt then it worked like a charm.
-
06-03-2009, 08:41 PM #4
Sweet glad that fixed it =)
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]