Results 1 to 10 of 70
Thread: Ballast Pump Failure
05-20-2009, 12:17 AM #11
As a matter of fact, I do have the Irritrol valve. I have the conventional valve. My 1200gph pumps do not produce enough pressure to open or push up on the diaphragm to let the water through. Now when I took the spring out, the water flowed like a champ when the pump was on. Now on the sown side, the water still flowed even when the pump was off. I ordered a different type of valve without a spring. It has a plunger and it is a low pressure valve. I hope it works if not, I hope your system works. I am running out of ideas.
this is the one that I used
Last edited by tazz3069; 05-20-2009 at 12:23 AM.Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
Live life to the extreme and no less!!