Results 1 to 10 of 12
Thread: bow walkthrough wind break
-
05-13-2009, 05:19 AM #1Junior Member
- Join Date
- Jul 2004
- Location
- IDAHO
- Posts
- 17
bow walkthrough wind break
I have an "04 Mobius LSV and live in the rocky mountains and want to build a plexiglass wind break for the walk-through to take the chill off in the early spring, late nights, and fall rides. anyone built one and installed or can you buy something from the factory.
-
05-13-2009, 08:47 AM #2
when i ordered my 08 last year, i asked about the same thing - unless they have changed for this year, there is nothing available from the factory except a vinyl curtain that was way overpriced.
you have the right to remain silent so shut the hell up!
http://www.wakesiderides.com/rides/i...ge=out&id=3213
http://www.wakeboatowners.com/tprkolbas
-
05-13-2009, 09:02 AM #3
my buddys Malibu has a plexi wind break that came with his boat It is really nice to have I am going to make one for my boat for sure
2007 Outback V
-
05-13-2009, 09:52 AM #4
search around on here. Somebody did this a while back. can't remember who.
Brad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold
-
05-13-2009, 12:00 PM #5
My buddy has an 06 LSV, went to tap plastics and they fabbed one for $75.
They just made a cardboard cut-out of the opening and took it down to them. He had it done in clear and put a moomba sticker on it. It looks great.
You can kinda see it in this pic.
PWI as usual...
-
05-13-2009, 12:04 PM #6
Well that didn't work. OK here is the link go down about 20 pics and you can see it.
http://www.wakesiderides.com/rides/i...ge=out&id=1371
PWI as usual...
-
05-14-2009, 09:55 PM #7
I like it Ive been thinking of doing this for some time now
I just need to pull the triggerLast edited by c.rix; 05-14-2009 at 09:57 PM.
2007 Outback V
-
05-14-2009, 10:10 PM #8Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
I have also been thinking of making one just need to find the time like all the other winter projects that i have wanted too do. It should not be too hard it is just putting in a rail on both sides and cutting somthing to fit in it.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
05-14-2009, 11:30 PM #9
-
05-15-2009, 06:20 AM #10
check out this post.
mine is in canvas and folds up smaller than a t shirt works great!
https://forum.moomba.com/showthread....t=wind+blockerA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold