Results 1 to 6 of 6
Thread: Ballast pump.
-
05-12-2009, 09:48 AM #1
Ballast pump.
Does anyone know what the part number to the empty pump is? How much is it and where should I get one.....How had is it to replace?
-
05-14-2009, 02:00 AM #2Senior Member
- Join Date
- Apr 2009
- Posts
- 233
Moomba uses rule 800GPH pumps for draining prior to 2009. Any 800GPH Aerator style pump with 3/4" NPT threads will do the job. Installation is around 15 minutes. Feel free to contact me if you need help sourcing one.
-
05-14-2009, 08:39 AM #3Senior Member
- Join Date
- Jan 2006
- Location
- Michigan
- Posts
- 135
I'm currently having issues with my center empty pump. The replacement for it is a 700gph rule 203fc. However they don't seem to make that pump anymore, it has been replaced with the 403 which I don't know whether or not it is the same exact size.
(http://www.cgedwards.com/Rule/rule03.html)
-
05-14-2009, 01:45 PM #4Senior Member
- Join Date
- Apr 2009
- Posts
- 233
I would probably not recommend using the 403 replacement for this application. It is designed for a livewell, in which case flow rate is not of huge concern. Finding a pump with a straight intake would be a better choice and will result in faster draining.
-
05-19-2009, 03:14 AM #5Member
- Join Date
- Oct 2006
- Location
- Hong Kong
- Posts
- 61
-
05-21-2009, 03:11 AM #6Senior Member
- Join Date
- Apr 2009
- Posts
- 233
See my post above, I would go with Attwood's Tsunami T800 over the 403C.