Results 1 to 10 of 19
Thread: Upgrading from gravity 1 to 3
Threaded View
-
03-13-2009, 10:22 PM #1Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
Upgrading from gravity 1 to 3
Ok so i am looking to upgrade from Gravity 1 to a gravity 3 and wanted to know if anyone had any ideas. Below is a layout of what i will do with a pic.
I will replace the current pump with a Jabsco pump that will fill and empity.
Add 3 more valves. One for each side and an extra one for adding another sac for surfing.
Wire the whole system up. Yet to be figured out but it is just wires and who cares if one bag fills when one is drainned.
I do not know if i would need to overfill holes / air holes. Would make it easy to see when the bags are full by the water flowing out the side of the boat.2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill