




Anyone know the inside dimension for the bow roller (between the metal uprights)for an 07 single axle boatmate. Is it 3.5" or 4" ? Mine is in storage so i can't look until may. I want to put a poly roller on it.
Thanks in advance
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
I changed mine last summer and I believe it's 3". I know it's not 4".
07 Mobius LS--Razorback Red
Seark,
Thanks, 4" seams a little wide probably for bigger boats
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
Just measured mine. 2007 OBV, boatmate single axle trailer. 3.25" inside of plate to inside of plate.
montana, thanks for the actual measurement. so 1/8" play on either side.for the 3" poly
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
jm, have you thought about getting a boat buddie instead of the roller?
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
Not really, the boat goes off and on the trailer about twice a year then sits in our lift after that. i just don't want to clean the black marks every year off the bow roller,therefore the poly roller.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
It's the segmented 3" roller, replaceed mine last year.
2007 Mobius LSV
had to replace mine too.. the factory one ate up the gelcoat around the bow eye when it gave up and let the bolt inside rub against the bow! WOW>> THANKS.
Brad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold
Hey Razzman.
Where did you get that roller from?
I really like it.
Cheers