Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default Boatmate trailer

    Anyone know the inside dimension for the bow roller (between the metal uprights)for an 07 single axle boatmate. Is it 3.5" or 4" ? Mine is in storage so i can't look until may. I want to put a poly roller on it.

    Thanks in advance
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  2. #2
    Join Date
    Jun 2007
    Location
    Lake Village, AR
    Posts
    428

    Default

    I changed mine last summer and I believe it's 3". I know it's not 4".
    07 Mobius LS--Razorback Red

  3. #3
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Seark,

    Thanks, 4" seams a little wide probably for bigger boats
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  4. #4
    Join Date
    Oct 2008
    Location
    Bozeman Montana
    Posts
    15

    Default

    Just measured mine. 2007 OBV, boatmate single axle trailer. 3.25" inside of plate to inside of plate.

  5. #5
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    montana, thanks for the actual measurement. so 1/8" play on either side.for the 3" poly
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #6
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    jm, have you thought about getting a boat buddie instead of the roller?
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  7. #7
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    Not really, the boat goes off and on the trailer about twice a year then sits in our lift after that. i just don't want to clean the black marks every year off the bow roller,therefore the poly roller.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  8. #8
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    It's the segmented 3" roller, replaceed mine last year.
    Attached Images Attached Images
    2007 Mobius LSV

  9. #9
    Join Date
    Aug 2006
    Location
    Salt Lake City
    Posts
    2,291

    Default

    had to replace mine too.. the factory one ate up the gelcoat around the bow eye when it gave up and let the bolt inside rub against the bow! WOW>> THANKS.
    Brad

    2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  10. #10
    Join Date
    Jun 2006
    Location
    Edmonton, AB, Canada
    Posts
    60

    Default

    Hey Razzman.

    Where did you get that roller from?

    I really like it.

    Cheers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •