Page 1 of 2 12 LastLast
Results 1 to 10 of 26

Thread: Guide Pole Pads

Hybrid View

  1. #1
    Join Date
    Feb 2007
    Location
    Chicago, IL
    Posts
    257

    Default Guide Pole Pads

    Has anybody found a good source for guide pole pads? I don't really need anything fancy and printed, just something to protect the boat. I see Overtons has some, but I'm not sure if the poles are 2" or 2 3/8" (the two sizes they offer). My trailer is in storage. Anybody happen to know the diameter of the poles on our boats?

    Thanks in advance.

  2. #2
    Join Date
    Aug 2006
    Location
    Salt Lake City
    Posts
    2,291

    Default

    DT
    Check here:
    http://cgi.ebay.com/ebaymotors/Wakeb...mZ120321909123

    I bought some from them for my previous boat.. they say their pads fit 2-2 1/2"...
    Look at their ebay store for options.. their reg. website is screaminsacs.com

    I was pleased with the ones I got from them.. I may get some more to replace my factory Moomba pads... they are fading and have a little wear from the fence where I park (TIGHT FIT!)

    BW
    Brad

    2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  3. #3
    Join Date
    Feb 2007
    Location
    Chicago, IL
    Posts
    257

    Default

    Awesome. Thank you.

  4. #4
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    DT,

    Atlanta Marine replaces the stock Moomba pads with ones that say Atlanta Marine and have the stock ones in a box in the parts dept. I don't know what they cost, but if you want ones that say Moomba, let me know and I'll pick them up for you when I take the boat in for winterization in the next 2-3 weeks.

  5. #5
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    my 07 OBV trailer single axle has 2" poles about 30". i called boatmate yesterday so i could replace the plastic liner. they are cheap, and brittle I want to get some stronger stuff like black abs or pvc and HD/lowes so it is stronger. I snapped one putting the boat on the trailer sunday. Trailer too deep and canal current much too strong due to lowering the lake level.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #6
    Join Date
    Feb 2007
    Location
    Chicago, IL
    Posts
    257

    Default

    Quote Originally Posted by wolfeman131 View Post
    DT,

    Atlanta Marine replaces the stock Moomba pads with ones that say Atlanta Marine and have the stock ones in a box in the parts dept. I don't know what they cost, but if you want ones that say Moomba, let me know and I'll pick them up for you when I take the boat in for winterization in the next 2-3 weeks.
    Thanks for the offer. I ordered the set of eBay that 04 suggested.

  7. #7
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Anybody have a good source for these? I duct taped mine up before our July trip but the covers are torn too. Need to replace them both. I don't care what they say on them (other than maybe MC).
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  8. #8
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Cynde @ Atlanta Marine

  9. #9
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    Quote Originally Posted by kaneboats View Post
    Anybody have a good source for these? I duct taped mine up before our July trip but the covers are torn too. Need to replace them both. I don't care what they say on them (other than maybe MC).
    Just pads or inner plastic too?
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  10. #10
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    The plastic parts are fine. Just the pads, ma'am. And covers.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •