Results 1 to 3 of 3
Thread: Cleats
-
10-02-2008, 09:59 AM #1
Senior Member
- Join Date
- Apr 2005
- Location
- Madison, WI
- Posts
- 278
Cleats
Im going to be adding cleats to my LSV this winter and I have my eye on the Attwood 4" popup cleats. What size are the factory cleats? Should I go with the 6" cleats? Ive seen some other style of flush mount other than Attwood that look like they finish cleaner near the hull. I need some input as to what folks have for cleats and what they like, how many, etc.
Jim Hagen
Madison, Wisconsin
facebook.com/signedgewraps
2011 Moomba Mobius LSV - Exiled
2002 Moomba Mobius LSV - Sold
-
10-02-2008, 01:42 PM #2
Senior Member
- Join Date
- Sep 2005
- Location
- Austin, Tejas
- Posts
- 491
The stock Moomba cleats are the 4" attwood cleats. When I had my Outback I was looking at adding the Attwood myself. After pricing them I actually got the Moomba etched one from my dealer cheaper than what I could find the unetched ones for. Check with your dealer before you buy them, unless you just dont want yours to say Moomba on them.
-
10-02-2008, 02:13 PM #3
Senior Member
- Join Date
- May 2007
- Location
- Naperville, IL
- Posts
- 315
I concur with Pickle. The 4" Attwood cleat is the same thing you can get from your dealer with the Moomba name on them. I don't know that they were cheaper than the Attwoods, but they were certainly no more expensive and look very nice. Discussed further here:
https://forum.moomba.com/showthread....ghlight=cleats
Reply With Quote