Boat Mods - What have you done?

[Razzman]

I always like seeing these threads so i figured i'd kick one off, it's always fun to see what everyones doing to the rides.

So here's what i've done since getting our '07 LSV in April;

1) Stolz Bow Roller, so much nicer!
2) New Reg Numbers, matches the graphics
3) Flip-up Bow Navlight, clean and out of the way.
4) Added the transom remote, nice to have.
5) And of course the infamous Seadek Swim Pad.

Still More ...

[Razzman]

There's still more ...

6) Airboom Wake Racks
7) Airbooms are quick disconnect racks
New Roswell Mirror Arm, replaced the old broken Roswell N/C!
9) Covers for the Tower & Racks. Keeps bugs off!
10) Rod Saver Auto Ratchet straps...Sweet!

Still More yet ...

[Razzman]

As you can see i like changing and modifying stuff a lot!

11) Dual Batteries
12) Bluesea Battery Switch & SI Series ACR
13) Xantrex 1000w Power Inverter
14) Dotit LED Lights in all Compartments
15) 750 lb. Fly High Extreme sac

One last thing ...

[Razzman]

16) Relocated the fire extinguisher.
17) Stainless Thru-hull fittings.
1 Gunwale step pads.

So let's see what y'all have done

[cab13367]

Razz,

Good topic. I've got a long list myself. Here goes.

Walk-thru transom:



Supra steering wheel:


Monster Tower Mirror Arm:

[cab13367]

Polk speakers and stainless steel cupholders all around:


Relocated most of the gauges:

[viking]

16) Relocated the fire extinguisher.
17) Stainless Thru-hull fittings.
1 Gunwale step pads.

So let's see what y'all have done

Hey Razz,
I know this is old but that's what these forums are for right. Do some research!! What is that you used for gunwale pads. It that seadek foam? Looks like it. I was thinking of using that OR gator grip for gunwale, bow, and possibly on the transom above swim platform where all the gear hits the boat when guests not paying attention!!
Thanks

[Razzman]

Yeah it's the 3mm Seadek, two seasons and it's holding up well.

[moombadaze]

Al, how do you like those tower speakers ?-ive been looking at those

[sandm]

flip up bow light, how tough was that? and cost? I have smashed one already, and at $35/pop, would make sense to replace..

I like the idea on the transom light, but supra's have an outlet near the rear cupholders and that's on the wrong side to be using a pump to fill up a surfsac unless you are goofy footed, so probably not going to do.

def. like the re-positioned ballast switches. may do that one as well. a nice stainless plate would fill the hole nicely. can't cost more than $20 to get a shop to cut one up nice, or maybe a piece of carbon? would also make a nice place to store a few cd's, since our deck is at the drivers seat. maybe a cubby out of a car?

I want to find the metal plates that some boats use on the side so you are standing on them when accessing the tower as opposed to standing on the gelcoat, but again, a good winter project.