Results 1 to 10 of 12
Thread: Monster Tower Cargo Rack Bimini
-
08-28-2008, 11:25 PM #1
Monster Tower Cargo Rack Bimini
Started a new thread as many were interested in what I would find when I visited Monster Tower's facility in Alpharetta, GA today.
I worked with Kenton ([email protected]) on email first and he took care of all my questions today. Very nice guy, very knowledgeable of the rack, let me take pics and measurements, etc. I tried to haggle for a Moomba owners discount - even showed him Ed's deal with Seadek - but didn't have any luck. Mention you read this thread and see if you can get a few $$ off as I told him quite a few seemed interested.
Despite my poor negotiation skills, I have one in the garage! I checked out the Z-5 Cargo when I bought my boat, tried to get one on my OBV and have been on Zegm's LS with the Z-5. I think these cargo tops are great due to their versatility for holding all the water toys from skis, to kneeboards, surfboards, wakeboards and even the dreaded tube. I keep my boat in a cradle lift with cables and was looking for the rotating racks as I have seen people get racks and boards tangled in their cables. I like the cargo rack option as it's one less thing to worry about when docking for us.
In my opionion, the Monster Cargo rack appears to be a very high quality and a tough competitor for the Z-5. Stainless construction for the frame and Great Lakes custom canvas (same used on my factory bimini). Nice design for the locking pins and smooth pivot action to drop the top and get to your gear. If the customer service is as good after the sale as it was prior, I anticipate being a happy customer.
I purchased the Medium size for my '08 OBV. It is 48" side to side and 67" front to back. Looks easy to install and will try to remember to document with pics. The pics below are from the Monster Tower showroom today.
Last edited by wolfeman131; 08-28-2008 at 11:28 PM.
-
08-29-2008, 08:41 AM #2Senior Member
- Join Date
- Aug 2007
- Location
- Nashville, TN
- Posts
- 257
Thanks for the trip, the pictures and the post!
I think I'm going to order one also. Do you know what size is on the one with the Monster Tower in the picture? I have that same monster tower on my Outback LS and want to know what width I need. I'd like it as wide as possible, but am fearful I would have to get the small one as the front tower legs on the Monster Tower MT@ are pretty narrow. What did you think of it mounted on their own towers?
By the way, that's my wakeboard sitting on top of the rack - it must be a sign.
-
08-29-2008, 10:26 AM #3
The one pictured is the Medium size and that is the MT2 tower. Mounted to this tower, it was a very nice total package. They have the prototype on the tower (normally there are some flaws with prototypes), but this looked very nice. I pushed & pulled on the rack and mounts and thought it was solid. The only question I have is with the screws that go through the mounts and into the tower. I'll hold my opinion until I get throught with the installation.
I'm rather new to the whole inboard scene, but think I can spot a quality product, and the Monster Tower products look very nice to me. I checked out their speakers and racks also. They have some nice features such as a quick release for the racks (looks like a bicycle seat tightner).
-
08-29-2008, 11:15 AM #4
How much $$$$$$
Let's ride
07 FoilTech Hydrofoil
-
08-29-2008, 11:51 AM #5
Wolfeman, I have there tower mirror arm--it is quality stuff, I'm not sure about the mount(screwing into the tower is best option tho)
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
08-29-2008, 11:54 AM #6
Wolfe- that thing looks sharp and very sturdy to boot. Cool!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
08-29-2008, 12:01 PM #7
-
08-29-2008, 01:32 PM #8Senior Member
- Join Date
- Oct 2007
- Location
- Panama City Florida
- Posts
- 1,798
Dr. D! Great job!!! I wish I could visit Monster, I used to work in Cumming. I need them to make a kneeboard rack.
I am sure that the upper mount that is screwed onto the frame is just for the protype. We love our z-cargo top! I do also remember seeing a "patent pending" sticker on it too which makes me wonder if Monster sells the z-cargo to Moomba? Certainly as with all good engineers they have a z-cargo sitting around there somewhere as a benchmark and would have seen that sticker? But anyways that is a great concept to use "vertical storage space". Many of the plants I work in use this concept for storage and additional office space. Hey if its up there it is free space Use It!!!
PS I believe the Z-cargo was a 1595.00 option, not sure what it cost over the counter.
-
08-29-2008, 02:11 PM #9
-
08-29-2008, 03:08 PM #10
Pretty Sure z5 is made by a diff company.
Patents don't generally cover as broad as a Cargo Bimini top, but more like the attachment system, the way it folds up, etc. plus design patents only cover "DESIGN" and can be gone around
Patent world is fun/expensive world. Been in a fight on one this week!Brad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold