Please, this thread is for anyone who has done or is strongly considering relocating the factory ballast switches. I was talking with my machine shop friend about making Cab a custom cover, but its to expensive to make just one. However if I can find out how many people truly want something like this then I know the cost will go down and all will benefit.

The cover will be roughly 3.25 X 7.25 in size. The material will be aluminium either 1/8 of an inch or 1/4 whatever works the best. I want to chamfer the edges on all four corner. Means it will ramp down thick to thin. It will have the Moomba logo cnc'd in to it, much like my oval I had made. The surface will have a textured surface just like the factory boardracks do. 4 holes will be drilled and counter sunk in the approximate location of the holes that you have now.

Price will depend on volume. One was going to be in the 150 to 200 range, which to expensive for what its going to be used for. So lets all get together and help brother Cab get a great looking cover.

I'll give this post the rest of the week to get a count of the yes's and will set the price and move forward.
--------------------
If this project goes good then I will take on the gunnal step project, because I too want something cool like that.


Crack-a-lack people!

Aqua