Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2008
    Location
    Baton Rouge
    Posts
    12

    Default Flame Arrestor Replacement

    Have an 03 LSV with the 5.7L FI 330 HP motor. Where can I get a replacement flame arrestor? Are these filters cleanable?

    David

  2. #2
    Join Date
    Aug 2006
    Location
    Salt Lake City
    Posts
    2,291

    Default

    David,
    I have been looking into replacing mine with a K&N... They have info on their site.
    I ran a K & N in my Tahoe for about 70k miles.. kinda hard to tell much difference..but I think it was a little better. Other than that, check with your dealer..
    Here is the reference for Indmar motors:
    Indmar

    Engine & Fuel System Size Total Ht Element Ht Part # Footnotes
    5.7L LS-1 Corvette MPI 5.7L V8 N/A N/A N/A
    5.7L Hammerhead 2 bbl 5.7L V8 N/A N/A N/A
    5.7L Monsoon EFI 5.7L V8 N/A N/A N/A
    5.7L Malibu Vortec 4 bbl 5.7L V8 3.75" 2" 59-3264 1
    5.7l Vortec Carb 4 bbl 5.7L V8 3.75" 2" 59-3264 1
    5.7L Vortec PFI 5.7L V8 N/A N/A N/A
    5.7L Vortec TBI 5.7L V8 3.75" 2" 59-3264 1,3
    7.4L 4 bbl 7.4L V8 3.75" 2" 59-3264 1
    7.4L MPI 7.4L V8 N/A N/A 59-5020
    8.1L 4 bbl 8.1L V8 4.50" 2.75" 59-3364 1,2
    8.1L PFI 8.1L V8 N/A N/A 59-5020
    Brad

    2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
    2006 Moomba Mobius LSV sold
    2004 Outback sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •