Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2007
    Posts
    190

    Default FAE install tips?

    I got my FAE yesterday, and I'm having some trouble with the early install steps. It came with two metal flanges that insert into the boat exhaust outlets. My problem is that they don't seem to go in far enough to allow the FAE to butt up against the boat. I tried tapping them in with a hammer.

    Did anyone else run into this?
    thanks

  2. #2
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    tlatoani, take a look here http://www.freshairexhaust.com/insta...llGallery.html. I'm not sure what you mean by "butt up against the boat", maybe the picture install will help with that.
    2007 Mobius LSV

  3. #3
    Join Date
    Nov 2007
    Posts
    190

    Default

    In the 2nd picture under "moomba/supra" it shows the rubber hose all the way against the boat. My FAE came basically assembled. When I push the rubber hose over the flange and the plastic exhaust outlet it wont go all the way onto the plastic outlet because the metal flange sticks out too far. Should I pull the rubber hoses off of the FAE and install them first?

    Gah that's complicated. Hopefully Larry replies :P

    thanks

Similar Threads

  1. Tips for Changing Impeller on LSV
    By 04OUTBACK in forum Service & Repair
    Replies: 35
    Last Post: 03-03-2008, 11:10 PM
  2. any tips
    By liquidlite in forum General Chat
    Replies: 9
    Last Post: 10-23-2007, 09:46 PM
  3. V-Drive tips
    By Yellowmobius in forum General Chat
    Replies: 3
    Last Post: 05-07-2005, 08:00 PM
  4. Tips to get begginers up
    By Livindadream in forum Skiing & Slalom
    Replies: 8
    Last Post: 10-12-2004, 05:28 PM
  5. Oil Change tips
    By dburroug in forum Service & Repair
    Replies: 4
    Last Post: 07-21-2003, 10:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •