Results 1 to 10 of 10
-
04-10-2008, 01:24 PM #1Senior Member
- Join Date
- Feb 2008
- Location
- Houston, TX
- Posts
- 119
Anyone using the KTS-RC100MR LCD wired remote?
Now that my stereo install is done, I'm looking to add this upgraded wired remote at the driver's seat and move the factory remote back to the transom.
Has anyone installed this remote? Was it worth the money (and time if there was anything difficult about the install)?
http://www.lafayetteradio.com/html/d...asp?search=369-ryan
'10 Wakesetter LSV
-
04-10-2008, 02:48 PM #2Senior Member
- Join Date
- Nov 2007
- Posts
- 190
Re: Anyone using the KTS-RC100MR LCD wired remote?
Originally Posted by Tyger
Will this cover the recessed area where the factory remote is installed? If it displays ipod info I'd buy it as well. 85 bucks doesnt seem too bad.
-
04-10-2008, 05:20 PM #3
Tyger,
How would this remote connect to the head unit? Looks like it has a plug with a round head on it - does it connect to the CD changer plug?
AlAl
2006 Mobius LSV
-
04-10-2008, 05:44 PM #4
I think that remote is only compatible with the larger Kenwood marine head unit (I forget the model number) that has the fold-down flap.
-
12-02-2010, 07:06 PM #5
Anyone know if I can use this with the factory KDC-MP238 deck? Will it plug in to the decks changer plug? (round plug) or, Can I cust and splice wires together to make it work? I have the factory Kenwood 238 deck, and those crappy Moomba wired remots really suck. Hoping I can make the KTS-RC100MR work with the kenwood 238. Called Kenwood, they were no help. afterthey told me the "RC100MR is not a Kenwood product" humph!
08 Outback. Private Lake Owner.
-
12-03-2010, 12:55 PM #6
-
12-03-2010, 08:02 PM #7
Thanks, thought that might be the case, I cust into the cable, there were 6 or 7 small wires, ass opposed to 4 wires with the aeware remote. What is a good replacement for the aeware remote, a 4 wire set up. There is a kenwood remote smaller, simpler with no lcd, that has 4 wires, (KR/C50/60) my only question, do the buttons work better than the aeware remote? I have to find a remote that works wit hthe factory set up. Anyone want a 100MR remote?? I have both ends, but cut the cable on it... $30 if anyone wants...
08 Outback. Private Lake Owner.
-
12-03-2010, 08:48 PM #8
I think the replacement is the KCA-RC107MR
compatible with the Kenwood KMR-700 Marine iPod/USB Receiver (up to 3 remotes can be connected)
and the KMR-440U Marine CD Receiver (only 1 remote can be connected).
its an 8 pin connector
In my 2010 lsv I have the MB Quart system and this will cover the (holes for) mb Quart remotes
-
12-04-2010, 12:41 AM #9
Nah, that aint it... This system just has 4 wires, yelow, black, red, and a signal wire.. I think the KCA-RC50MR or RC60 would work... I dont know...
08 Outback. Private Lake Owner.
-
12-04-2010, 01:09 AM #10
You are correct the 107 remote will not work for you. But either the 50 or 60 will.There is a thread on here about upgrading your kenwood deck and keeping the same factory remotes.
Nate
Similar Threads
-
Wired remote for ipod display?
By TL7 in forum General ChatReplies: 1Last Post: 04-13-2008, 11:11 AM -
Wired Remote
By JesseC in forum General ChatReplies: 11Last Post: 03-22-2008, 05:05 PM -
Cd player and wired remote (Factory) Please Help
By sethscott in forum General ChatReplies: 13Last Post: 02-06-2008, 01:13 PM -
Wired remote
By rdemore in forum General ChatReplies: 0Last Post: 08-07-2006, 05:18 PM -
Wired Remote
By Nafplio in forum Sales & InformationReplies: 12Last Post: 11-03-2005, 05:44 PM