Results 1 to 7 of 7
Thread: prop repair in S.E.Michigan.
-
09-03-2007, 10:52 AM #1
prop repair in S.E.Michigan.
We spent last week on vacation on Dale Hollow lake in Tenn. For some reason my wife tried to drive over a one foot deep sand bar.Luckily all that happened was a small ding in the prop.Looking for suggestions for a good prop shop in S.E. Michigan.
-
09-03-2007, 03:33 PM #2
You may want to consider shipping the prop to a good repair shop then you can pick from across the country and others on the Moomba board can give their recommendations. I've had good results with Precision Propeller in Spokane Washington where I've sent my I/O props but luckily I've had no experience repairing the DD prop. Good luck.
http://www.precisionpropco.com/
-
09-03-2007, 09:46 PM #3
Sure....blame it on the wife!
.
.
B
-
09-04-2007, 07:54 PM #4
The worst part was she was mad at ME,cause I drove by her in a 80foot houseboat and didn't stop to help.I wasn't getting anywhere near that sand bar in the houseboat!
-
09-04-2007, 08:01 PM #5
May want to have someone check your shaft to be sure it was not bent any.. It does not take much.. I bent mine this summer on a stump.. Only thing that would worry me due to the sand bar is if the boat sat on the sandbar with weight on the prop, it could have bent a little..
Good luck.. I looked into the online shops. There is a local shop here that does good work but I am in Mississippi.. Check with your dealer to see if they recommend anyone.. One of my riding friends bent his and got it back in a week so if you go local, it may be a bit faster... Although i would probably go cheapest..HABrad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold
-
09-04-2007, 11:26 PM #6Member
- Join Date
- Feb 2007
- Location
- Shelby, NC
- Posts
- 52
I have the 14 x 14.25 OJ wakeboard prop on my 07 LSV - BTW this an expensive prop - We were up at Lake Norman about a month ago with about 10 friends when we hit a hidden shoal in the middle of the lake. Went under with goggles and found my prop to be pretty chewed up. After much looking around on the net and consulting my dealer - sent prop off to Murphys Propellers in Norfolk, VA www.murphyspropellers.com
Took about a week and $160 and I was back in business.
Good Luck - those prop chops are never any fun
-
09-06-2007, 01:04 PM #7Senior Member
- Join Date
- Mar 2003
- Location
- Dearborn, Michigan
- Posts
- 193
Jim,
I know several people that have used Wolverine Propeller in Licoln Park with great succes. They are a certified Prop Scan shop and really seem to know their stuff. Give them a call. They can be reached at (313) 383-0020 or 1-866-PROPGUY.
They are also on the web at www.wolverinepropeller.com
Similar Threads
-
WTB Outback in Michigan
By gtgrytza in forum Moomba ClassifiedsReplies: 11Last Post: 05-12-2008, 03:54 PM -
Gel Coat Repair?
By gsi09907 in forum General ChatReplies: 4Last Post: 07-16-2007, 08:12 PM -
Vinyl Repair
By outback 4 in forum Service & RepairReplies: 1Last Post: 04-30-2007, 04:52 PM -
repair
By Eagle River in forum Service & RepairReplies: 0Last Post: 08-22-2005, 06:37 PM -
99 Kanga repair
By Memphish in forum Service & RepairReplies: 3Last Post: 06-13-2003, 03:26 PM