Results 1 to 3 of 3

Thread: tounge weight

  1. #1
    Join Date
    May 2007
    Posts
    2

    Default tounge weight

    I am needing to replace my trailer jack and was wanting to know if anyone knows the approximate tounge weight for a mobius LSV. I am thinking that a 1000lb lift jack will work but just want to make sure..

    thanks for your help

  2. #2
    Join Date
    Aug 2006
    Location
    Salt Lake City
    Posts
    2,291

    Default

    1,000 should be plenty.. I am not sure of the Tongue weight but your vehicle is probably only rated for 500 tongue load. I would guess it is around 300-400lbs based on distribution... 1,000 would be plenty.

    BW
    Brad

    2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  3. #3
    Join Date
    Aug 2004
    Location
    Lake Hickory, North Carolina
    Posts
    1,390

    Default

    I think you can figure 5 - 10% of the total weight of the boat and trailer for the tongue weight
    .
    hope this helps
    .
    B

Similar Threads

  1. how much weight do I need?
    By INlakeOutback in forum Wakeboarding | Wakeskating
    Replies: 4
    Last Post: 06-15-2007, 08:07 AM
  2. How much weight?
    By superman in forum General Chat
    Replies: 7
    Last Post: 05-24-2007, 09:50 AM
  3. 2001 Mobius LS weight with trailer weight?
    By pmarti15 in forum Sales & Information
    Replies: 9
    Last Post: 05-17-2006, 04:41 PM
  4. Pivoting tounge jack
    By marchina in forum Service & Repair
    Replies: 2
    Last Post: 12-21-2005, 11:26 AM
  5. Weight of 05 LSV Ballasts
    By sbagley in forum General Chat
    Replies: 6
    Last Post: 08-11-2005, 02:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •