Results 1 to 10 of 10
Thread: Tower pipe diameter
-
07-16-2003, 09:14 PM #1Junior Member
- Join Date
- Feb 2003
- Location
- Sartell, MN
- Posts
- 26
Tower pipe diameter
Does anyone know the pipe diameter on the rad-a-cage tower. Just had one instaled and need to order some board racks.
Thanks
-
07-16-2003, 11:00 PM #2Brian Raymond Guest
Cage dia.
1.66". Wake designs has the racks for you. Brian Raymond
-
07-16-2003, 11:35 PM #3Junior Member
- Join Date
- Feb 2003
- Location
- Sartell, MN
- Posts
- 26
I'm looking at the Mako racks. Do you know what size that corresponds to.
-
07-17-2003, 03:49 PM #4Junior Member
- Join Date
- Feb 2003
- Posts
- 18
Look at Fluid Concepts. Solid looking, boards don't rattle, and the clamp works.
Dave
-
07-17-2003, 07:18 PM #5Junior Member
- Join Date
- Feb 2003
- Location
- Sartell, MN
- Posts
- 26
Dave,
I've been debating between the two. But I like the fact that I can easily remove the Mako racks when not on the water. Do you or anyone else know if the Mako racks rattle alot.
Still need to know if the 1 3/4" is the corect size clamp to order.
Steve
-
07-17-2003, 08:40 PM #6Junior Member
- Join Date
- Feb 2003
- Posts
- 18
Try this thread in this heading:
http://www.moomba.com/bb/viewtopic.php?t=268
It was after reading the posts that I decided on Fluid concepts. The prices are reasonable, also.
Dave
PS.... If you go back 2 or 3 pages under this heading (general chat), you'll see this topic has come up before.
-
07-18-2003, 10:07 AM #7Junior Member
- Join Date
- May 2003
- Location
- Fayetteville, NC
- Posts
- 20
I posted on a similar thread before and I still stand by my new racks from www.nice-rack.com. The price is right for the quality and they are solid as a rock on my tower. Went through some huge chop last weekend they didn't make a so much as a squeek and didn't losen up a bit. Just make sure if you call them you specify that it is for a rad-a-cage so they will send the right mounting bracket. Can't say enough about these, just give'm a look. WARNING: Don't forget to put the dash in the URL, or you will end up at a site that has NOTHING to do...well almost nothing to do with our sport.
-
07-30-2003, 12:51 PM #8Junior Member
- Join Date
- Feb 2003
- Location
- Scottsdale AZ
- Posts
- 7
Again, I'm a big fan of Fluid concepts racks. Our racks are the 1 5/8" diameter. They DONT RATTLE, other do, I've seen them all, even some fall off!!!!
-
07-30-2003, 09:44 PM #9Junior Member
- Join Date
- Feb 2003
- Location
- Sartell, MN
- Posts
- 26
Thanks for your input guys.
I just ordered from Fluid Concepts yesterday. I'll let you know how they work.
-
04-26-2004, 01:58 AM #10Guest
Replying to Topic 'Tower pipe diameter'
Originally posted by skibohdi
Dave,
I've been debating between the two. But I like the fact that I can easily remove the Mako racks when not on the water. Do you or anyone else know if the Mako racks rattle alot.
Still need to know if the 1 3/4" is the corect size clamp to order.
Steve
mako nor the dealer for skiers choice would help me. Lost 600.oo just like that.
Similar Threads
-
Tower diameter
By jkendall79 in forum General ChatReplies: 3Last Post: 04-22-2008, 11:47 PM -
Tower Diameter
By waketwowake in forum General ChatReplies: 1Last Post: 05-29-2007, 09:47 AM -
Tower Diameter
By SoTX in forum Sales & InformationReplies: 3Last Post: 07-12-2005, 10:54 AM -
Tower diameter
By sextons in forum Boat OwnersReplies: 4Last Post: 12-16-2003, 04:06 PM -
Tower tubing diameter
By dburroug in forum General ChatReplies: 0Last Post: 05-06-2003, 01:30 PM