Results 1 to 2 of 2
Thread: Where to locate ballast pump
-
05-31-2007, 09:01 PM #1
Where to locate ballast pump
Hi
Im going to install a Jabsco Reversible pump on my Mobius DD and the Jabsco pump is not sumersible so I will like to know where do you think it will be the best location for the pump and valves, I guess that some one has done something like this and I will apreciate a lot if you can help me out.
Thanks
-
06-01-2007, 07:32 AM #2
Usually there shouldn't be anymore than a couple inches of water in the bilge, so I would think an inch or so above the bilge pump should be satisfactory. You have to remember, @ wakebording speeds the bow is up which means any standing water down there runs to the stern.
.
Hope this helps,
.
B
Similar Threads
-
Ballast Pump
By joe98684 in forum Service & RepairReplies: 4Last Post: 07-10-2008, 01:32 AM -
Ballast pump
By Dannad in forum Service & RepairReplies: 7Last Post: 06-04-2007, 07:37 AM -
Ballast Pump
By Dannad in forum Sales & InformationReplies: 1Last Post: 05-22-2007, 05:32 PM -
ballast pump
By TheBeeZ in forum Service & RepairReplies: 1Last Post: 07-31-2003, 09:51 PM