Just completed an upgrade to a '22 MOJO (pretty pumped) and I'm fixing a few odds and ends on my 07 before selling. I finally tracked down the correct actuators on the wake plate from bennett and they're installed and working. However, I need wiring information on the gauge! I cut the wire several years ago when I installed the wrong actuators so I don't remember how they were wired.

From the Guage to the transom, there is a wire with a bare wire, and two greens.
The actuator has black and red.
Behind the guage the bare is connected to common ground.

I'm assuming one green to each of red and black to make a circuit and the bare wire is just for the guage up front?

TIA!