




Today we got to Lake Martin for our annual week vacation. VRBO rental is pretty nice and tucked into the back of a cove. Diggin this spot!
![]()
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
pretty nice digs.... I could live there![]()
'06 Supra Launch 20SSV-gone but never forgotten
Me too! Told my wife let’s just become squatters
Trying something new. Phase 5 kneeboarding
![]()
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
What a great spot…. Would be hard to leave….
2022 Makai
Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint - Shoreline Shade
400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
Ballast Mods: (aka TINRFD): 1500lb of lead (you read that right) and +700lb WM Bags
Looks amazing, only thing missing from perfection is a shiny new SV on the dock!!!
2023 SL400
previous - 2000 SAN210
The Max looks pretty good out there I’d say!
2022 Makai
Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint - Shoreline Shade
400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
Ballast Mods: (aka TINRFD): 1500lb of lead (you read that right) and +700lb WM Bags
Yup it’s ultra blue flake and definitely pop on the water! As much as I love my Max I’d love to upgrade into the SV. It is an amazing boat! My dialed in wave is a bit larger and cleaner, but it doesn’t have the same level of push and firmness the SV had. It’s a really nice boat!
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
The weather is WI has been odd this spring/early summer. Rain every other day, warm, cold..haven’t been using the boat..So instead we went racing this past weekend..Half the day was nice and sunny, the other have cloudy and windy..
Sent from my iPad using Tapatalk
2021 Moomba Max
Prepping for the season and was going for another upgrade to the stiffening of the engine panels….. have a look at what the panels look like before I stiffen up the lower portion….
Will be drilling and bolting the existing angle iron through the panel as well as running some additional angle iron perpendicular to the existing and parallel to, and as close to the channel where the panel sits on the bottom
Sent from my iPad using Tapatalk
Last edited by Dukabor; 06-10-2024 at 07:31 PM.
2022 Makai
Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint - Shoreline Shade
400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
Ballast Mods: (aka TINRFD): 1500lb of lead (you read that right) and +700lb WM Bags