Early spring photos

[rockymtnsurfer]

The weather heated up this weekend so we got out for the first time. Water was 47 but the air was around 68. Felt great to get out!

Assuming Jordanelle....stopped by last weekend.....Chilly! Had to get some work done down at Marine Products and look at the new Supras. They have been testing up there and said it wasnt too bad except their hands. Way to go for it! Ours are still all iced over, but should open up soon.

[dyrmz134]

Weird seeing the boat like this !


Sent from my iPhone using Tapatalk

[HFarr]

Yep. Perfect time to wax the bottom! LOL!

Sent from my SM-G781V using Tapatalk

[dyrmz134]

I'll just close my eyes until it's in the water

[Mjhknox]

I'll just close my eyes until it's in the water

Nah, years ago I would laugh at the 38-42’ cigarette boats bouncing around before they were dropped in the water.


Sent from my iPhone using Tapatalk

[HFarr]

Yeah, I think the phrase " please don't fall, please don't fall" would be quietly running through my mind all the way to the water!

Sent from my SM-G781V using Tapatalk

[Mxmark4]

Replaced my rack bungees today , i didnt want to buy them from Roswell for 50 bucks apiece so I grabbed some bulk bungee cord , hog rings, and heat shrink tubing. Started with a loose measurement from the old bungees and went from there.
Crimped with hog rings and slid some heat shrink over them just like Roswell did on the originals.

I didnt want to find nylon strap to make a handle but I crimped a loop in them to slide over the hook on the rack and called it good. Held my board just fine.

[HFarr]

Looks like factory!

Sent from my SM-G781V using Tapatalk

[996scott]

Thoses turned out great! My bungees are getting pretty hammered so this may be on my list this summer. Thanks for posting.

[Mxmark4]

Thoses turned out great! My bungees are getting pretty hammered so this may be on my list this summer. Thanks for posting.

Hog ring pliers from amazon and 25 ft of 1/4 in bungee cord. Ended up with enough to replace them several times over. Think all in was 25 dollars , I had the heat shrink in the shop already, but even of you bought it its a 30 dollar project and was easy peasy.