Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Join Date
    Mar 2021
    Posts
    2

    Default 2021 Moomba Craz impeller (engine not ballast) replacement, quote $710

    Ive seen a few posts on this topic. General consensus is that this is easy-ish especially with the right impeller tool.

    My dealer quoted me $710 just for the engine impeller. $80 for part and 3 hours of labor at $189 + tax. When I questioned this they said that the newer models have the engine situated so that this task is now very tough and indeed takes 3 hours.

    The boat is in storage or I would check myself.

    Can anyone confirm/deny? I haven't seen any discussion around this having any truth, but please weigh in if you can.

  2. #2

    Default

    I’m not mechanical at all and it was cake. Took me 30 minutes my first time. Once you do it once you will never pay to have it done again. I do have an impeller puller that really helped.


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,361

    Default

    The impeller is $30.
    Impeller tool is $50.

    Takes 45 minutes from start to finish including the celebration beer and washing your hands.
    For $710 I'll fly to you and do it! That is robbery pricing.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  4. #4
    Join Date
    May 2021
    Location
    Pittsburgh, pa
    Posts
    57

    Default

    I have the '21 Craz and have done this several times. It is not hard. Maybe 20 min. I actually changed one out on the water, without the impeller tool. $700 is robbery!
    Moomba Craz ‘21
    Barefoot Nautique ‘91 (traded-in)

  5. #5
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,217

    Default

    For that price with labor, I would think they quoted all impellers - engine and ballast.

    Yes - relatively easy, but a dealer has a set number of hours per job - like going to the car shop and paying for a quoted number of labor hours.
    Should be lots of videos online if you try it yourself - YouTube.

    Same with oil changes - easy to do, but the dealer has a set number of hours plus shop fees in their quotes.
    2018 Supra SL400

  6. #6
    Join Date
    Sep 2020
    Posts
    278

    Default

    Man, that is wild. I did mine on my indmar 6.0 today in about 15min lol.


    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    2,066

    Default

    Vankula, what region/area are you in?

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  8. #8
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,738

    Default

    It took about 30-40 min on my 21 Craz. It's a bit of a pain but doable for sure. $700 is insane!
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  9. #9
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,217

    Default

    Maybe the three hours breaks down to:

    1 hour of staring at it and hoping it comes out

    1 hour of removing and installing

    1 hour of gazing at a finished product and feeling proud.


    Sent from my iPhone using Tapatalk
    2018 Supra SL400

  10. #10
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    2,066

    Default

    That third one is the best part of any do-it yourself job!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •