Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2020
    Posts
    6

    Default RGB lights 2023 Moomba max

    Hello,

    So Iíve taken the Black piece off under the dash and found the rgb power connection to hook a module up to it. But I still canít find the led wires to plug into it? Any idea where they could be? Any help would be greatly appreciated


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Jul 2022
    Location
    Royal Oak, MI
    Posts
    52

    Default

    Quote Originally Posted by contra1833 View Post
    Hello,

    So I’ve taken the Black piece off under the dash and found the rgb power connection to hook a module up to it. But I still can’t find the led wires to plug into it? Any idea where they could be? Any help would be greatly appreciated


    Sent from my iPhone using Tapatalk
    The plug under the dash is 2 pin, and wired to the RGB switch. The LED strips in the boat are RGB strips but the wire that runs around the boat is only 2 wire if you do not have the RGB option.

    You would need to either order the OEM ITC Versicolor controller or a cheap controller of your own, the 2 pin (+) and (-) connection under the dash would provide power to a RGB controller.. then you would run the RGB wire to the controller.
    2023 Moomba Max
    1,345 WM Rear| 860 WM Bow bag's + 800lbs lead = 6,350lbs | Prop-3591
    2014 Moomba Mojo 2.5- SOLD
    Tow- 2002 F-350 Super Duty 7.3L PSD

  3. #3
    Join Date
    Jun 2020
    Posts
    6

    Default

    I have RGB wires running to all speakers and in my tower. Just can’t find where they start so I can connect. IMG_2063.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •