Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
  1. #11
    Join Date
    Aug 2021
    Location
    Knoxville
    Posts
    398

    Default

    Where are the sensors located? Im assuming my craz has them as well so I guess I may need to move mine up more too?
    2019 Craz
    OJ 950
    Wakemakers bags
    Heatercraft triple heater

  2. #12
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Behind the back or rear , stern, panel of each bag. On the Makai anyway.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  3. #13
    Join Date
    Apr 2020
    Location
    Prince George Canada
    Posts
    315

    Default

    Quote Originally Posted by Mxmark4 View Post
    Where are the sensors located? Im assuming my craz has them as well so I guess I may need to move mine up more too?
    You should be able to see the OEM vent tubes tucked up under the gunwhales in each rear locker. Follow those back to your bags and you’ll find the sensors.
    2020 Moomba Mojo
    2008 Mastercraft Prostar 197 40th Anniversary
    Owner Ness Lake Watersports
    Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
    Audio by Wetsounds, MTX, JL Audio, Clarion
    15 X 13.00 ACME prop

  4. #14
    Join Date
    Sep 2021
    Location
    Charlotte NC
    Posts
    35

    Default

    I have the OJ 950 prop on the boat now and as a spare prop I have the OJ 945

    2019 Moomba Mojo
    Tow Rig 2019 Ford F150 Raptor

  5. #15
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Quote Originally Posted by Tommy2slow View Post
    You should be able to see the OEM vent tubes tucked up under the gunwhales in each rear locker. Follow those back to your bags and you’ll find the sensors.
    This is where they are on my 21 Makai. Photo of the stock bag location setup. Sensor is the piece near the top on the black pipe in the middle.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  6. #16
    Join Date
    Sep 2021
    Location
    Charlotte NC
    Posts
    35

    Default

    do you think t OJ950 that is on the boat is the correct prop with the added weight?

    2019 Moomba Mojo
    Tow Rig 2019 Ford F150 Raptor

  7. #17
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    That is a 15x13 pitch? It should have plenty of low end torque for you at low to medium elevation.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  8. #18
    Join Date
    May 2017
    Location
    Alberta, Canada
    Posts
    304

    Default

    Quote Originally Posted by HFarr View Post
    That is a 15x13 pitch? It should have plenty of low end torque for you at low to medium elevation.

    Sent from my SM-G781V using Tapatalk
    0.130" cup as well! depending on your pitch, speed and altitiude you could pull 6k np
    2021 Mojo, 6.2L Raptor 400/1.76, Acme 3407 15.5x13, G6, Flow3, +6500 lbs ballast
    2005 Mobius LSV (sold)
    Windermere Lake, B.C., 2800' Elevation
    2021 Mojo Mods

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •