Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,471

    Default

    From an electrical standpoint, you will need to wire in the new power harness for the 770 and then run a new 2-chnl to the in-boat speaker amp and change the input mode on the amp.

    Physically, then 70 is more rectangle and wider and the 770 is more square and narrower. So some fabrication is likely required.

  2. #12
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,361

    Default

    Quote Originally Posted by Buckeye View Post
    So, how hard is it to switch out a 70 for a 770. I'm looking because I have no zone control for the front. My cabin and front speakers run off one channel / amp. my towers and sub of the other amp. But I do not have the ability with the 70 to have separate volume control for the front vs the cabin. Does this make sense? other possible solutions?
    You can get the 70 to do zone control but it is a total pain.
    I had mine for cabin, bow, and sub on zone 1 and tower on zone 2. I then had to adjust gain to make the bow and cabin match. I was also able to use fade left and right with this setup.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  3. #13
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    2,066

    Default

    Quote Originally Posted by shawnrw View Post
    If anybody is interested, I've updated the plate via CAD to accept the larger RA-770 radio. 3D printing one now to test fit, etc.
    Attachment 30834
    Nicely done!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  4. #14
    Join Date
    Jan 2022
    Posts
    4

    Default

    Did this fit and work? I would definitely be interested
    2022 Makai 400

  5. #15
    Join Date
    Sep 2020
    Posts
    1

    Default

    Any update?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •